SAR Technology - Downloads V5 V6

SAR Technology: 'Incident Commander Pro' Software
- Downloads V5 & V6 -

'Incident Commander Pro' V6 Files	File
The 'Incident Commander Pro' Help file provides an overview of the entire program's operation as well as a detailed discussion of every form within the Incident Commander software. Unzip after downloading.	Incident_Commander Pro V6 Help 4,267 MB unzipped
'Incident Commander Pro' V6 Client Setup Installs the 'Incident Commander Pro' V6 system files onto each client computer to be networked.	ICPro ClientSetup 24 MB
Installation & Registration instructions for 'Incident Commander Pro' V6 Describes the procedure for installing and registering 'Incident Commander Pro' V6	IncidentCommanderProV6 Installation_Registration Instructions.pdf 18 KB
Configuring 'Incident Commander Pro' V6 for Windows7 Network Use Procedure for configuring 'Incident Commander Pro' V6 to run over a Windows7 network.	Configuring 'Incident Commander Pro'V6 for Windows7 Network Use
Configuring 'Incident Commander Pro' V6 for Windows XP Network Use Procedure for configuring 'Incident Commander Pro' V6 to run over a Windows XP network.	Configuring Incident CommanderPro For NetworkUse.pdf 248 KB
New 'Incident Commander Pro' V6 Print Reports - with enhanced printer formatting and color support. Unzip ICReports and copy the files into C:\Program Files\SAR Technology\IC\Reports replacing the existing files of the same name.	ICReports.zip 52 KB
'Incident Commander Pro' V6 ICS 309 Communications Print-Report - Image Copy incidentcommanderblue.ico into C:\Program Files\SAR Technology\IC\Graphics to print ICS309 Communications Brief and Terse Reports	incidentcommander blue.ico 4 KB
Download the SAR Technology Screen Saver!	SAR Technology Screen Saver 5.2 MB

'Incident Commander' V5 Documents & System Files	File
The Incident Commander IC Version5 Client Setup. Installs the Incident Commander V5 system files onto each client computer to be networked.	IC V5_ClientSetup 10 MB
Incident Commander Version 5 Unzip into a temporary directory and then run setup.exe (in Windows Administrator mode) to install the program	IncidentCommander_V5.01.zip 60 MB
Configuring 'Incident Commander' for Network Use PDF document describes the set-by-step process required to configure Windows XP to run 'Incident Commander' over a network.	Configuring Incident Commander For Network Use.pdf 273 KB
The Microsoft VFP ODBC driver is required to be present and registered in the C:\windows\system32 directory (vfpodbc.dll) for the Incident Commander Pro GIS module to pass it's information to the main application. Download the VFPODBC.msi installer and then double click this file to install the VFP ODBC driver	Microsoft ODBC Driver Installer 895 KB

Two Microsoft files MSCOMCTL.OCX and msvcr70.dll are required to be present and registered in the C:\windows\system32 directory. Read the included text file command to correctly register these files in the Window's Registry.	Incident Commander OCX & DLL Registry Files 678KB

	'Incident Commander Pro' - Typical System Requirements
	CPU & RAM: The 'Incident Commander Pro' software will operate quite well on any computer that runs at 2GHz with 512MB RAM or greater. As the program has many graphic-based features faster speeds and more RAM are always beneficial.
	Hard Drive: The program requires about 100MB of hard drive space once installed. A similar amount of free space should be left available on the hard drive after installation, for the program to create temporary files while it is operating.
	Monitors: 'Incident Commander Pro' benefits greatly from the use of a reasonably large display screen - to display as much mission information as possible. A dual monitor system is recommended to display 'Incident Commander Pro' forms on one monitor and the GIS map display on the other monitor.
	Network Card: If the software is to be run over a local network - strongly recommended for most missions - then the computer will require a network card.
	Operating Systems: 'Incident Commander Pro' operates on the Windows 98, Windows 2000, Windows XP , Windows Vista and Windows 7. Windows XP Pro and Windows 7 operating systems are preferred, due to their increased stability.
	'Incident Commander Pro' - Optimized System Requirements
	Optimal Laptop Computer Specifications for 'Incident Commander Pro': Processor Type: Dual core 2.4/2.93 GHz processors. Hard Drive: 300GB to 500 GB / 5400rpm hard drive. RAM: 4GB DDR3 RAM Graphics Card: eg ATI Mobility Radeon HD 5165 with 1GB RAM .... The separate graphics card is usually faster than the graphics integrated onto the motherboard. Display: LED backlit 17-inch 1600 x 900. Ethernet Port: 10/100 WiFi: Integrated 802.11/n Optical CD Drive: DVD Card Reader: for SD; MMC; MS; MS PRO; xD ESATA Port .... up to six times faster than USB2 for data transfer. USB Ports: 3 to 4 ports Battery: Hi Capacity 9000mAh 12-cell lithium ion. Operating System: Windows XP, Windows Server or Windows 7.
	CPU & RAM: 2.4GHz dual core processors, fast DDR3 RAM and the dedicated graphics card. Together these deliver fast loading and refreshing of the processor-intensive digital mapping module. Ports: The very fast eSATA port is useful for transferring large (multi Gigabyte) map file collections form a portable hard drive into the computer. USB port configuration are recommended to handle barcode scanning and future developments of 'Incident Commander Pro'. Graphics Card: A dedicated graphics card, while not common on laptop computers, provides significantly faster map loading and graphic displays.
	Printer/Copier/Fax: Brother MFC 6490CW .... Prints both 8-1/2" x 11" and 11" x 17" paper (ideal for printing larger color maps)
	Barcode Scanner: Metrologic MS5145 Eclipse .... Tested and optimized for 'Incident Commander Pro' - ideal for rapid check-in of personnel, organizations, etc.